Home > News > Content

Seven Aluminum Alloy Doors And Windows Maintenance Small Coup

Apr 11, 2017

1. Aluminum alloy doors and windows in use, action to light, push and pull along with its natural; find difficulties not hard push hard pull, should first exclude the failure. Ash accumulation, deformation is the main reason for the difficulty of pulling the doors and windows of aluminum alloy, to keep the door frame clean, especially the cleaning of push-pull groove. Vacuum cleaners can be used to absorb the ash accumulated in the trough and the door seal.

2. Clean aluminum doors and windows, people do not tread on the aluminum box, do not pull the frame to support.

3. Aluminum alloy doors and windows can be coated with soft cloth or neutral detergent, do not use ordinary soap and washing powder, more can not use scouring powder, toilet detergent, such as acid alkali detergent.

4. After the rainy day, should promptly wipe dry wet glass and door window frames, pay special attention to wipe dry chute stagnant water. The chute is used for a long time, the friction force increases, can add a little oil or coated with a layer of fire wax.

5. The connection parts of the aluminium alloy frame should be inspected regularly, and the bolt is tightened in time, replacing the damaged parts. Positioning shaft PIN, wind support, spring and other aluminum alloy doors and windows vulnerable parts, to check regularly, regular add lubricating oil to keep clean, flexible.

6. Sealing top and glass seal is the key to ensure the sealing insulation of doors and windows, if there is peeling to be repaired in time, replacement.

7. Often check the aluminum alloy frame wall, the day long if there is loose easy to make the whole frame deformation, so that the doors and windows cannot shut down, sealed. So the screw loose joints should be tightened immediately, such as screw footings loose, use epoxy strong glue to adjust a small amount of cement seal.